Inverters

My inverter won't turn on/light up

Ensure the connected battery is fully charged and the cables are connected to the correct terminals (positive to positive, negative to negative). Ensure any fuses, relays or circuit breakers between the inverter and battery are still intact.

My inverter beeps/faults when turned on or under load

Make a note of how many times your model beeps when it faults. Then, check the fault code/troubleshooting guide in your user guide or our website. This will have a list of audible faults and their corresponding solutions.

My inverter won't run a load that it should be rated for

Please work through the following troubleshooting steps:. Double-check the specifications of your appliance and ensure that it operates at a wattage lower than the rating for your inverter. You can confirm this with an in-line wattmeter. Ensure the a

My remote control doesn't turn my inverter on

Please work through the following troubleshooting steps:. - Ensure the cable is plugged in and secure in both the inverter and the remote control panel. - Ensure the rocker switch on the inverter itself is turned off before attempting to turn the uni

My remote control doesn't light up but still turns the inverter on

Check the cabling on the remote control to see if it has been modified or extended. If it has, then this will be the cause of your LED issue.

My inverter is making a loud vibrating noise when under load

Ensure the base of the inverter is mounted to a secure and solid surface within the vehicle. If it isn't, the slight vibrations from the inverter's internal fans will be amplified.