Can I charge an iTechworld battery and use it at the same time?
Yes! iTechworld batteries can safely and simultaneously charge and discharge at the same time with various devices allowing for unparalleled versatility.
Yes! iTechworld batteries can safely and simultaneously charge and discharge at the same time with various devices allowing for unparalleled versatility.
Yes! Our X Range of iTechworld batteries are suitable for use under the bonnet, though we recommend a heat shield. The only times you shouldn't mount your battery under the bonnet are when it is close to the turbo or if you have purchased a battery n
Please check the iTechworld website for a specific battery rating. The X Range of batteries is IP67-rated and uniquely suited to marine applications.
If you have a third-party adjustable charger, controller or regulator, we recommend setting the parameters as follows for optimal performance: - Bulk: 14.4V- Absorption: 14.4V- Float: 13.5V
Most chargers lacking a dedicated lithium charging profile can still charge your iTechworld lithium battery. The only chargers you will encounter issues with are those specifically designed for calcium-based batteries. The battery will charge from ap
If your charger has a lithium charging option, that should take priority above all others. If it does not have a lithium charging profile, use either AGM or gel, as iTechworld batteries are able to accept charge from these profiles and their charging
When creating a battery bank, you cannot mix the chemistries of the batteries. Suppose you want to charge an iTechworld battery from a cranking battery, lithium or otherwise. In that case, a DCDC charger must be in between, as this isolates the batte
Yes, iTechworld batteries can be connected in parallel—please refer to our website for the number of batteries that can be connected in parallel for your specific battery model. We do not recommend mixing batteries from other manufacturers.
Yes, iTechworld batteries can be connected in series—please refer to our website for the number of batteries that can be connected in series for your specific battery model. We do not recommend mixing batteries from other manufacturers.
Yes, iTechworld batteries can be mounted on their side - they cannot be mounted upside down.
iTechworld batteries do not hold a CCA or CA rating. However, they may be able to start some small vehicles (such as an outboard motor). iTechworld storage batteries should not be used for cranking applications.
First, charge your battery to a resting voltage of 13.2V—13.5V. Then, store it in a cool, dry environment away from moisture or humidity. Check the battery's voltage every three months, topping up the charge as required. Do not store your battery in
Yes, you can indeed use a trickle charger, however, a trickle charger is not necessary for iTechworld batteries. One of the best features of iTechworld batteries is their ability to hold charge for extended periods (provided there is no load). If the
Yes! Both PWM and MPPT solar controllers are compatible with our batteries, even if they do not have a lithium-specific charging profile. Your existing solar panel will charge an iTechworld battery.
We currently stock a 24V 100Ah Lithium Battery. Our 12v batteries can also be run in series to achieve 24v.
No, your battery will not be fully charged. We ship our batteries at a voltage of 13.1V which is around 85 - 90% charged.
The battery will be in Safe Mode. The most common reason for an iTechworld battery being in Safe Mode is from being drained to less than 10.5V of voltage. Follow this link to view different methods of bringing your battery out of Safe Mode.
Ensure that the load does not exceed the discharge rating of the current battery. Refer to your battery's specifications on the iTechworld website or your user guide for the discharge rating of your battery.
If your charging method's float voltage is lower than 13.5V, which is 100% full, the battery will only charge to that voltage. The ideal parameters for a battery charger are as follows:. - Bulk: 14.4V. - Absorption: 14.4V. - Float: 13.5V.
A lithium battery can charge to over 14V when a charger is connected. The battery will settle between 13.5 - 13.8V when this charging source is disconnected. A resting voltage of 13.5V or higher is considered full.
An iTechworld battery cannot self-discharge over a short period unless a load is applied. To test your battery, please follow the instructions below:. 1. Remove the battery from its current installation. 2. Disconnect all loads from this battery. Ens
All iTechworld batteries (excluding the Super Slim range) are cased in ABS material. The ABS plastic will warp slightly when exposed to heat, whereas other battery casings on the market will become brittle and break, exposing the battery's internals.
When using an iTechworld lithium battery in a battery box, you must do the following before use:. - Ensure your iTechworld lithium battery is fully charged before installing it in a battery box. We recommend a voltage of at least 13.5V. This is criti
Inside every iTechworld battery is a Battery Management System (BMS) that integrates various safety features not found in lead-acid, calcium or even other lithium batteries. To ensure iTechworld batteries are the safest on the Australian market, we h