All articles

My power station no longer charges to 100%, or drops to 0% prematurelyUpdated 3 months ago

This may be an issue with the power station's control panel. Please follow these instructions to resolve this issue:

1. Charge your power station as best you can to 100% (ensure you are using the correct charger that came with the unit).

2. Fully drain the power station to 0% from the AC and/or DC outputs (if the unit cuts off early, try turning it on again and keep draining it until you can no longer turn it on).

3. Recharge the power station back up to 100%. This will correct your issue with your control panel, and your power station will operate normally. 

 

Was this article helpful?
Yes
No